Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roof Installation Across Miami
Roof installation in Miami means navigating two things most Florida roofers never mention: Miami-Dade NOA product approvals and the county’s two-step inspection process. A new roof here typically runs $14,500 to $28,000 for a standard single-family home, with tile roofs landing higher than shingle. We coordinate the permit, the approved materials, both inspections, and the tear-off so the job closes clean. Call (325) 246-5075 to schedule a free estimate with Dylan Pace and our Miami crew.
Why Crestview Roofing Is Miami’s Preferred Roof Installation Company
Miami homeowners call us because we write down the price before work starts, and that number doesn’t move unless we find something structural the original bid never covered. Reviews from Coral Gables and Coconut Grove mention the same thing: a real person answers the phone, the crew shows up with a name and a live arrival time, and photos document the tear-off, dry-in, and final product. We work across Miami-Dade, from Westchester to Kendall, and we know which suppliers carry NOA-approved stock without a two-week backorder.
Dylan Pace has built our reputation on walking roofs before quoting them. That means confirming the actual number of squares, checking decking condition, and reviewing whether the existing tile carries a current NOA number. A bid that skips those steps is a bid that surprises you later. Ours doesn’t.
Tile Roof in Miami
Tile Roof installation in Miami is often a replacement project on homes built between the 1940s and 1980s, when barrel tile and flat concrete tile were standard across neighborhoods like Shenandoah and Little Havana. A full tile roof replacement here runs $18,000 to $32,000 depending on square count, decking repairs, and whether the old tile needs disposal. Miami-Dade requires the new tile product to hold a current NOA, so we verify that paperwork before ordering.
Tear-Off and Deck Inspection
Old tile comes off first. That’s when we find what prior bids ignored: rotted plywood, skipped decking gaps, or rusted fasteners. In Little Havana, we tore off a failed tile roof on a 1950s block home and found the original decking had been skipped in places, so we added new plywood before laying underlayment and setting the new Boral tile. The homeowner had two prior quotes that never mentioned the decking, which is exactly the kind of discovery that shifts a final invoice. We walked the roof with the inspector after the dry-in, then installed the tile, replaced the drip edge and fascia, and closed it out with a signed final inspection.
Underlayment and NOA Compliance
Miami’s afternoon downpours make the underlayment layer just as important as the tile itself. We install a double-layer synthetic underlayment system that meets Miami-Dade uplift requirements, then set the tile with fasteners rated for the county’s wind zone. The inspector checks both the dry-in and the final tile installation, so the NOA number on your product has to be current and legible.
Roof Ventilation in Miami
Roof Ventilation in Miami gets overlooked on a lot of older homes, especially bungalows and ranch houses in neighborhoods like Allapattah and Brownsville where attic airflow was never designed for modern AC loads. A proper ventilation installation, whether ridge vents, soffit vents, or solar-powered attic fans, runs $900 to $2,800 depending on attic size and access. Poor ventilation here doesn’t just heat up the attic, it bakes the shingles from underneath and pushes AC costs higher through the summer.
Ridge and Soffit Vent Installation
When we install a new roof, we check whether the existing ventilation meets current code for attic square footage. Many Miami homes have soffits painted over or blocked by old insulation, so we clear them and add continuous ridge venting where the roof geometry allows. This balances intake and exhaust so the attic temperature drops and the roof deck doesn’t rot from trapped humidity.
Powered Attic Ventilation
For homes with low-slope sections or limited ridge line, a solar attic fan is often the cleaner solution. These units run on sunlight, need no new wiring, and can drop attic temperatures 20 to 30 degrees in Miami’s August heat. We size the fan to the attic volume and install it with proper flashing so it never leaks.
Trusted Brands We Service in Miami
Crestview Roofing installs materials from GAF, Atlas, and Boral, among other manufacturer-backed lines. For Miami homeowners, that matters because these brands maintain current Miami-Dade NOAs on their most popular products, which keeps the permit and inspection process moving. We stock common underlayment, fasteners, and flashing from local South Florida suppliers so you’re not waiting on a truck from Tampa when the dry-in is scheduled. If you have a specific brand preference, tell us during the estimate and we’ll confirm the NOA before we quote it.
Common Roof Installation Problems We See in Miami Homes
- Bids priced per square without confirming the square count. A roof that’s actually 32 squares quoted at 28 squares means a 14% price jump after the tear-off. We measure every roof with a laser before we write a number.
- Missing Miami-Dade NOA paperwork on the tile or shingle product. If the product number doesn’t match the county’s current approval list, the inspection stalls and the job drags. We pull the NOA before we order materials.
- Skipping ice and water shield in valleys and around penetrations. Even though it doesn’t freeze in Miami, the county’s heavy afternoon storms drive water sideways. A self-adhered membrane in valleys and at chimneys is cheap insurance against a leak that shows up six months later.
- Old flashing reused on a new roof. Flashing – the metal strips that seal joints around chimneys and vents – corrodes in Miami’s salt air. Reusing it saves a few hundred dollars at install and costs thousands when it fails. We replace flashing on every new roof.
Pricing for Roof Installation in Miami, FL
Roof installation pricing in Miami breaks down into three main buckets: the tear-off, the materials, and the labor. Tear-off and dumpster fees run $3,500 to $6,000 depending on layers and access. Shingle materials run $5,500 to $9,000 for a standard home; tile runs $9,000 to $18,000. Labor adds $8,000 to $14,000. A complete asphalt shingle roof on a 1,800-square-foot home typically lands between $14,500 and $21,000. Tile runs $18,000 to $32,000. We deliver a written price before any work starts, and that number is the number on the invoice, unless we find a structural issue like the decking in Little Havana. Call (325) 246-5075 for a precise quote on your roof.
We Also Serve Cities Near Miami
Crestview Roofing handles roof installations across South Florida, including Miami and the surrounding communities. We regularly work in Miami Beach, Coral Gables, Key Biscayne, and Hialeah. If you’re outside the city limits, call us – our Roof Installation team covers the greater Miami metro and will let you know if we can reach your address.
Serving Miami, FL – Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Roof Installation in Miami
Yes, every new roof in Miami requires a building permit from Miami-Dade County or your municipality, and the job must pass two inspections: one after the dry-in and one after the final installation. Our price includes pulling the permit and scheduling both inspections. Call (325) 246-5075 and we’ll confirm the specific requirements for your address.
A standard shingle roof in Miami takes 3 to 5 working days from tear-off to final inspection. Tile roofs run 5 to 8 days because the tile setting is slower. Weather can stretch that, especially during summer afternoon storms, but we schedule around the forecast and keep you updated by text with photos at each stage.
Look for a Miami-Dade NOA (Notice of Acceptance) number or a Florida Product Approval number on the shingle, tile, or underlayment. The inspector checks this against the county’s current list. If the product isn’t on the list, the job stops. We verify every material’s NOA before it goes on your roof. Call (325) 246-5075 and we’ll show you exactly which approvals apply to your project.
A square is 100 square feet of roof area, and a bid priced per square only works if the square count is accurate. A Miami home’s roof can measure 28 to 35 squares depending on hips, valleys, and overhangs. If your bid assumes too few squares, the final invoice jumps after tear-off. We laser-measure every roof before we quote. Get your free estimate at (325) 246-5075.
Most of the time, yes. Miami-Dade code limits layering a new roof over old material, and a full tear-off is the only way to inspect the decking underneath. The tear-off also lets us replace rotted wood and install new underlayment to current code. We’ll confirm whether your roof qualifies for a re-cover during the estimate. Call (325) 246-5075 to schedule yours.
Contact Crestview Roofing in Miami
If you’re pricing a new roof in Miami, start with a written estimate that spells out the squares, the materials, the NOA approvals, and the inspection schedule. Dylan Pace and our Miami crew will walk the roof, measure it properly, and hand you a number in writing before any work begins. Call (325) 246-5075 to schedule your free estimate today.
Written by Dylan Pace, Owner at Crestview Roofing, serving Miami through the Relay Home Co. family since 2000.