Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roof Installation Across Hialeah
A full roof installation in Hialeah typically costs between $9,500 and $24,000 depending on material, home size, and whether the old roof has to come off first. Most teardown-and-replace jobs on a standard 1,400 to 2,000 square foot home here land in the $12,000 to $18,000 range. We serve every neighborhood in Hialeah, from Palm Springs to the East Side, and we’re coordinated out of our Miami (South FL) office with crews working locally in the city every week. Call (325) 246-5075 and we’ll get you a written quote before any work starts.
Why Crestview Roofing Is Hialeah’s Preferred Roof Installation Company
We built Crestview Roofing in 2000 with a simple rule: the price you’re quoted is the price you pay. Dylan Pace set that standard, and we’ve held to it on every Hialeah job since. Homeowners here tell us the same story: a roofer quotes one number, then “finds” something after tear-off and the invoice jumps. That’s the opposite of how we work. Our Roof Installation team writes the full scope before anything is removed, so you know what the decking, underlayment, flashing, and disposal cost as individual line items.
Hialeah’s housing stock matters here. There are thousands of 1960s and 1970s concrete-tile homes west of the Palmetto, and flat or low-slope roofs east toward the warehouses near 36th Street. Both present different tear-off and attachment questions, and quoting them correctly means knowing which one you’re dealing with. We do.
Standing Seam Metal Roof in Hialeah
A standing seam metal roof in Hialeah runs $11 to $18 per square foot installed, so a 1,600 square foot home typically lands between $17,600 and $28,800 depending on panel gauge, seam height, and how much of the existing roof has to be removed first. Homeowners choose it here because it carries the strongest wind-uplift ratings of any roof system a Hialeah inspector will see, and because the panel attachment pattern, not just the metal itself, is what earns that rating on final inspection.
The Tear-Off Question
If you have an old concrete tile roof, the panels can’t go on top of it. The tile comes off, the decking is inspected, and new synthetic underlayment is installed. That tear-off is a real line item: dumpsters, labor, and disposal. It’s not optional, and any bid that skips it is a low number designed to bait the callback.
Attachment and Uplift
Hialeah sits in Miami-Dade County’s High-Velocity Hurricane Zone, and the Florida Building Code applies a stricter wind-uplift standard here than almost anywhere else in the country. We use manufacturer-back panels from Atlas and Tamko, and the clip spacing and screw pattern are set to the product approval sheet, not a generic Florida spec. The inspector will ask to see that sheet. So will we.
Tile Roof in Hialeah
A new tile roof in Hialeah runs $9 to $14 per square foot installed, so a typical 1,600 square foot home lands between $14,400 and $22,400. Concrete tile is what a lot of this city already has, and replacing it with a like-for-like system is often the fastest path through Hialeah’s permitting and inspection process. Boral and Atlas both make tile products approved for Miami-Dade’s high-wind zone.
What Tile Replacement Actually Involves
Tile replacement here isn’t just swapping out broken pieces. It means removing the old tile and the old underlayment, checking the decking, and installing a two-ply or synthetic underlayment, new battens, and then the tile. Flashing (the metal strips that seal joints around chimneys, vents, and walls) gets replaced at the same time.
The Weight Factor
Tile is heavy. A concrete tile roof adds roughly 9 to 11 pounds per square foot to the structure, and Hialeah homes built before the late 1990s sometimes need a structural check before a tile-to-tile replacement proceeds. It’s a check that costs a few hundred dollars and it’s worth doing before you commit to the material.
Trusted Brands We Service in Hialeah
We install and repair roofs using manufacturer-backed materials from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. For Hialeah specifically, we stock Atlas and Tamko metal panel systems and Boral tile because those are the products that show up most often in the city’s wind-uplift and product-approval conversations. That means faster turnaround when you’re replacing a section or matching existing tile color along West 8th Avenue or up near the Hialeah Park area.
Common Roof Installation Problems We See in Hialeah Homes
- Old concrete tile hiding underlayment failure. By the time a Hialeah homeowner sees a ceiling stain, the underlayment under the tile has often been failing for years. Tear-off reveals what the tile was hiding, and that’s often the moment a “repair” quote becomes a full installation.
- Decking rot at the eaves and around penetrations. We regularly open roofs on 1960s and 1970s homes near Palm Avenue and find soft OSB or plywood where decades of humidity and occasional wind-driven rain have worked their way in. Decking replacement runs $3.50 to $6.50 per square foot once exposed.
- Flashing specified for standard wind zones. Hialeah’s High-Velocity Hurricane Zone requires flashing details that hold up to a different uplift standard. A quote using off-the-shelf flashing specs from a less strict Florida code can fail inspection and get sent back.
- Bids that omit tear-off and disposal. The biggest price jump we see happens when a roofer quotes a low “per square” install number but leaves out removing and disposing of old concrete tile. That’s dumpsters, manual labor, and hauling on a roof that can weigh four times what an asphalt shingle roof weighs.
Pricing for Roof Installation in Hialeah, FL
A full roof installation in Hialeah on a standard 1,400 to 2,000 square foot home runs $9,500 to $24,000. Metal standing seam runs $11 to $18 per square foot. Concrete tile runs $9 to $14 per square foot. Asphalt shingle, when it makes sense for a particular home, runs $5 to $8 per square foot. What moves the number: the size of the roof, whether the old roof is tile or shingle, whether the decking is rotted, and which underlayment and flashing specs the High-Velocity Hurricane Zone requires for your permit. Every Crestview quote has those items written out as line items before work begins. Call (325) 246-5075 for a free estimate, and we’ll send you a written price that matches the invoice.
We Also Serve Cities Near Hialeah
Crestview Roofing works throughout northwest Miami-Dade, and our crews regularly handle roof installations in Miami Gardens, Miami, Coral Gables, and North Miami Beach. If you’re just outside the Hialeah city limits or you know someone over in those cities who needs help, the same written pricing and documentation standard applies. Learn more about our full Roof Installation in Hialeah coverage or call us directly to check on your neighborhood.
Serving Hialeah, FL – Our Local Coverage Area
We’re based in the Hialeah area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Roof Installation in Hialeah
Yes. Every full roof installation in Hialeah requires a building permit from the City of Hialeah Building Department, and the work is inspected by a Miami-Dade County or city inspector against the Florida Building Code’s High-Velocity Hurricane Zone provisions. We pull the permit, schedule the inspections, and make sure the final inspection passes before the job is closed out.
Most full roof installations in Hialeah take 5 to 10 working days from tear-off to final inspection. Tile teardown on older Hialeah homes adds a day or two versus shingle removal because of the weight and the need for more dumpster capacity. Weather delays are real in the summer, but we give you a written calendar before work starts. Call (325) 246-5075 to get a realistic timeline for your home.
Because some Hialeah roofers bid “per square” without including tear-off, disposal, underlayment upgrades, and High-Velocity Hurricane Zone flashing details. A bid that looks $4,000 cheaper often is $4,000 cheaper because it’s missing half the job. We write every line item out before work starts, so you see what you’re actually comparing.
Yes, provided the panels or tile are installed with the attachment pattern and flashing details specified for Miami-Dade’s High-Velocity Hurricane Zone. Hialeah inspections check uplift ratings on the product approval sheet, not just the material name. We install Atlas and Tamko metal systems and Boral tile specifically because their Miami-Dade approvals are on file and pass inspection here.
Decking that is rotted, delaminated, or compromised is the main item, and it’s the one thing no one can see until the old roof is off. We flag soft spots during the estimate, but if more damage is found after tear-off, you get a photo and a line-item price before we proceed. That’s the difference between a quote that changes with proof and one that changes with a shrug. Call (325) 246-5075 for an exact quote, and the number on the page will be the number on the invoice.
Written by Dylan Pace, Owner at Crestview Roofing, serving Hialeah since 2000.