Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roof Installation Across Lauderhill
Roof installation in Lauderhill typically runs $9,500 to $16,800 for a standard single-family home, with TPO flat-roof work on rear additions landing between $4,200 and $7,800. Permits go through Lauderhill’s own building department, not Broward County, and most jobs take 2 to 4 days once tear-off starts. We’re the roofing crew that gives you a written price before any work begins, photo updates while the job runs, and a live arrival time you can track from your phone. Call (325) 246-5075 for a free estimate.
Why Crestview Roofing Is Lauderhill’s Preferred Roof Installation Company
Lauderhill homeowners deal with a specific set of roof realities: inland wind rules that differ from coastal Broward, a city-run permit desk with its own inspection sequence, and housing stock from the 1960s through the 1980s that’s hitting its second or third roof cycle. We know how those pieces fit together. Dylan Pace runs our crew with a straightforward rule: scope it right before we tear anything off, price it in writing, and document everything from decking condition to final ridge cap.
Our customers in Lauderhill consistently point to two things. First, the written price doesn’t move unless the scope genuinely changes. Second, they see photos of their decking before any underlayment goes down. That kind of visibility is rare in this trade, and it’s exactly what we built Crestview around back in 2000.
Part of the Relay Home Co. family, we operate under The Relay Visibility Guarantee. A live person answers calls 24/7. The technician arriving at your home is background-checked and uniformed, and you’ll know their name before they pull up. Our crews serve Lauderhill directly from our South FL dispatch office.
TPO Roofing Installation in Lauderhill
TPO Roofing Installation in Lauderhill covers the flat and low-slope sections most shingle-only bids ignore: rear additions, carports, and patio covers that tie into the main gable. The first sentence of any honest scope should separate those areas from the shingle count, because TPO requires its own membrane, heat-welded seams, and flashing details. A typical Lauderhill TPO job runs $4,200 to $7,800 depending on square footage, insulation condition, and how much edge metal needs replacing.
We’ve seen too many Lauderhill bids lump a flat rear addition into the shingle square count at the shingle rate. That’s wrong by method, and it creates the change-order fight after tear-off. TPO is welded at the seams, not nailed like shingles, and it’s the right system for Florida’s low-slope roof sections. We scope it as its own line item from the start.
What TPO work actually involves
We pull the old membrane, inspect the insulation board beneath it, and replace anything saturated or delaminated. Then we mechanically fasten new ISO board if needed, lay the TPO membrane, and heat-weld every seam. Termination bar, edge metal, and flashing around penetrations all get set before the final inspection.
When TPO makes sense on a Lauderhill home
Any roof section with less than 2:12 slope shouldn’t hold shingles. Lauderhill homes with rear additions, enclosed patios, or carport roofs almost always have at least one low-slope area. If the original builder used modified bitumen or an old torch-down system, TPO is the cleaner, cooler-running replacement that takes South Florida heat better.
Shingle Roof in Lauderhill
Shingle Roof installation in Lauderhill is the bread-and-butter scope for the city’s 1960s-to-1980s housing stock, where original 3-tab shingles have long since failed and homeowners are moving up to architectural profiles. A full shingle roof on a standard Lauderhill single-family home runs $9,500 to $16,800. That range covers tear-off, decking repairs (we’ll get to that), underlayment, starter strip, ridge vent, field shingles, and ridge cap.
Three-tab was the budget standard when most Lauderhill homes were built. It rarely survives past 15 years in South Florida’s sun and rain cycles. Architectural shingles like GAF Timberline HDZ run thicker, hold better in wind, and carry stronger manufacturer ratings. The upgrade isn’t cosmetic; it changes the roof’s performance envelope.
What a shingle installation looks like from deck to ridge
After tear-off, we inspect the decking. On older Lauderhill homes, the original decking is often 1×6 skip sheathing with gaps, and modern building code requires solid decking beneath the underlayment. That’s where re-decking with 7/16 OSB becomes part of the scope. It’s also where cheap bids fall apart, because they never walked the attic and priced solid decking from the start.
The layers that actually do the work
Synthetic underlayment goes down first, with ice and water shield in valleys and around all penetrations. Starter strip runs along every eave before field shingles go in. Ridge vent replaces passive vents on most Lauderhill replacements and changes attic airflow measurably. The manufacturer warranty only holds if the full system – shingles plus accessories – is registered as one bundled assembly.
Trusted Brands We Service in Lauderhill
We install and repair roofs using manufacturer-backed materials from brands homeowners actually recognize: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. For most Lauderhill shingle jobs we recommend GAF Timberline HDZ or Atlas Pinnacle, and we keep local stock of common accessory components so permits and scheduling don’t stall. The brand you pick doesn’t meaningfully change our labor cost; it changes your warranty ceiling and the shingle’s long-term wind and impact rating. We’ll walk you through the difference on a free estimate call.
Common Roof Installation Problems We See in Lauderhill Homes
- Rotted decking surfacing after tear-off. Homes along NW 56th Ave and throughout the West Ken Lark area often still have original 1×6 skip sheathing over attic spaces nobody priced. When shingles come off and the decking isn’t solid, the city requires replacement before underlayment goes down.
- Flat rear additions buried in the shingle count. Carports, patios, and enclosed sunrooms with low-slope roofs get priced as shingle square footage when they should be scoped as TPO assemblies. That’s a common change-order trap in the Inverrary and St. George neighborhoods.
- Warranty registrations that skip accessory bundles. If the starter strip, ridge vent, ridge cap, and underlayment aren’t registered with the shingle manufacturer as one system, the wind warranty is technically void even though the shingles are rated far higher. We handle the full registration.
- Old valleys and penetrations never re-flashed. The original metal around chimneys, vent pipes, and valley junctions on 1960s-era homes near the Swap Shop is long past useful life. A new roof over old flashing fails early at exactly those points.
Pricing for Roof Installation in Lauderhill, FL
Shingle roof installation in Lauderhill runs $9,500 to $16,800 on a standard single-family home. TPO on a flat rear addition or carport runs $4,200 to $7,800 as its own line item. The drivers that move you within those ranges are decking condition, roof complexity (valleys, hips, penetrations), square footage, and whether the city requires re-nailing or solid-deck upgrades on a re-roof. We give you a written price before any work starts, and that number holds unless the scope genuinely changes – and if it does, you see photos before you approve anything. Call (325) 246-5075 to schedule a free estimate.
We Also Serve Cities Near Lauderhill
Crestview Roofing serves Lauderhill and the surrounding South Florida communities, including Miami, Hialeah, Fort Lauderdale, and Pembroke Pines. If you’re comparing roofers across Broward and Miami-Dade, start with our Roof Installation page for the full scope breakdown. For everything specific to this city, bookmark our Roof Installation in Lauderhill hub.
Serving Lauderhill, FL – Our Local Coverage Area
We’re based in the Lauderhill area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Roof Installation in Lauderhill
Lauderhill runs its own building department, so permit turnaround typically runs 3 to 10 business days depending on submittal completeness, and you’ll generally have two inspections: an in-progress deck inspection after tear-off and before underlayment, and a final inspection once the roof is complete. We file the permit paperwork, schedule the inspections, and stand on site for both. Call (325) 246-5075 and we’ll walk you through the exact sequence for your home.
Lauderhill sits inland in Broward County, outside the coastal wind-borne debris region, so the strict HVHZ secondary water barrier rules that govern Fort Lauderdale and the beach don’t automatically apply. That said, many Lauderhill scopes still spec HVHZ methods because it’s simply the better assembly, and the city’s inspectors are familiar with both standards. We use synthetic underlayment plus ice and water shield in valleys and around penetrations on every job regardless. Call (325) 246-5075 for a scope that matches your home’s actual requirement.
Line up the line items: decking replacement (solid vs. skip sheathing), underlayment type, starter strip, ridge vent, valley flashing, and whether the warranty registration includes the accessory bundle. A cheaper Lauderhill bid usually means someone didn’t walk the attic, isn’t re-decking, or is burying the flat rear addition in the shingle count. We give you a fully itemized written price before work starts so you can compare apples to apples. Call (325) 246-5075 and we’ll send you a real line-item quote.
We install GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. Brand choice changes your material cost and warranty ceiling, not our labor. GAF Timberline HDZ and Atlas Pinnacle are the two we recommend most often in Lauderhill for their wind ratings and the strength of their accessory bundle warranties. Call (325) 246-5075 and we’ll price two or three brand options so you can decide with real numbers in hand.
Rotted decking that requires solid OSB replacement is the biggest one – it only surfaces after tear-off and it’s the change order cheap bids hide. Other drivers include discovering split rafters, re-nailing requirements from the city, or a flat rear addition that was incorrectly counted as shingle square footage. We minimize these by walking the attic before we quote. If something does surface, you get photos and a written change order before any additional work proceeds. Call (325) 246-5075 for a free estimate that’s scoped honestly from the start.
When we tore off a 22-square shingle roof off NW 56th Ave in West Ken Lark, the original 3-tab had failed over aged 1×6 skip sheathing. We re-decked with 7/16 OSB, laid synthetic underlayment and ice and water shield in the valleys and around all penetrations, then set GAF Timberline HDZ architectural shingles with a starter strip and ridge vent. The city passed the deck and final inspections on the same permit. That’s the job done in sequence, priced in writing, and documented with photos at every step.
Call (325) 246-5075 for your free Lauderhill roof installation estimate. A live person answers, day or night.
Written by Dylan Pace, Owner at Crestview Roofing, serving Lauderhill with written pricing and the 365-Day Done Right Promise.