Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roof Replacement Across West Palm Beach
Roof replacement in West Palm Beach typically runs $9,800 to $18,500 for a standard asphalt shingle roof on a 1,800 – 2,400 sq ft home, with coastal-spec upgrades adding $1,200 to $3,800 depending on fasteners, drip edge, and underlayment. Most full replacements take 2 – 4 days once materials land. That’s the honest range, and we put the exact number in writing before any work starts. If your roof is leaking, losing granules, or pushing 20 years in this salt air, call (325) 246-5075 and we’ll give you a straight answer.
We work throughout West Palm Beach, from the historic streets of El Cid and Flamingo Park down to the newer builds west of Jog Road. Salt aerosol off the Atlantic meets lagoon humidity here in a way inland roofs never experience. That changes what we specify, what we stock, and what we warn you about up front.
Why Crestview Roofing Is West Palm Beach’s Preferred Roof Replacement Company
Dylan Pace built Crestview Roofing in 2000 around a simple rule: the price on the written estimate is the price on the final invoice. No change orders, no door-knock surprises. That’s the Relay Visibility Guarantee, and it’s the only way we work in West Palm Beach or anywhere else. Before we tear off a single shingle, you get the full number, the material spec, and the name of the crew lead who’ll be on your roof.
We answer the phone with a live person, 24/7. When you call about a roof in West Palm Beach, you’ll talk to someone who knows the difference between a barrel-tile El Cid historic home and a 2000s builder-grade ranch in Riverwalk. You’ll get a real arrival time, not a four-hour window. And after the job, you’ll get before-and-after photos and a digital invoice by text, so there’s no guessing what was done.
Every replacement we install is backed by the 365-Day Done Right Promise. If a covered repair fails within a year, we come back and fix it at no charge. No negotiation, no runaround. In writing, included with every job.
Roof Replacement Contractor in West Palm Beach
As a Roof Replacement Contractor serving West Palm Beach, we handle the full tear-off down to the decking, inspect for rot and termite damage, replace any failed wood, install new underlayment and flashing, and lay the new shingle system to code. West Palm Beach homes need a contractor who understands the coastal corrosion zone between the Atlantic and the Lake Worth Lagoon. A roof that holds up fine in Royal Palm Beach can fail at the drip edge within seven years here.
Full Tear-Off and Re-Deck Inspection
We don’t roof over old shingles when the decking underneath is suspect. On West Palm Beach homes built before the 2002 Florida Building Code, decking is often 3/8-inch plywood that’s softened after years of lagoon humidity. We replace it with code-rated 1/2-inch CDX or ZIP system panels before anything else goes down, and we photograph every sheet so you see the rot we found before we cover it.
New Construction and Code-Compliant Installs
For new construction or additions in West Palm Beach, we coordinate with your GC and pull the permits ourselves. The local building department enforces wind-load requirements that exceed what inland crews are used to, especially east of I-95. We spec the fasteners and underlayment to pass inspection the first time.
Asphalt Shingle Roof Replacement in West Palm Beach
Asphalt Shingle Roof Replacement in West Palm Beach runs $9,800 to $18,500 for a typical home, with dimensional architectural shingles from GAF, CertainTeed, or Owens Corning making up the bulk of what we install. Architectural shingles hold a 130 mph wind rating when nailed with the right ring-shank pattern, which matters a lot when a named storm tracks toward Palm Beach County. The material cost difference between three-tab and architectural is meaningful, but the coastal-spec upgrade isn’t optional if you’re within a few miles of the water.
Flat and Low-Slope Sections
Plenty of mid-century homes in West Palm Beach have flat or low-slope sections, especially additions and carports. Those get a different system: modified bitumen or TPO membrane, sealed at every seam. Salt air doesn’t rust a TPO roof the way it rusts steel edge metal, but the fasteners still need to be stainless if they’ll be exposed. We inspect those details on every flat-roof portion we bid.
When to Replace vs. Repair
A repair makes sense when the damage is isolated: one valley, one vent boot, one section of flashing. When the roof is 18-plus years old and you’re seeing granules in the gutters after every storm, or rust stains bleeding down the fascia, replacement is the cheaper move over the next decade. We’ll tell you which one you actually need, even if the honest answer costs us the bigger job today.
Trusted Brands We Service in West Palm Beach
We install and repair roof systems from GAF, Owens Corning, CertainTeed, IKO, Atlas, Tamko, and Boral. For West Palm Beach’s coastal side, we lean on Atlas StormMaster and GAF Timberline lines because their synthetic underlayments are better suited to lagoon humidity. We stock common parts locally so a roof replacement in West Palm Beach doesn’t stall waiting on a drip edge shipment. Manufacturer-backed warranties are registered in your name before we close out the permit.
Common Roof Replacement Problems We See in West Palm Beach Homes
- Rusted drip edge and galvanized fasteners. Salt aerosol from the Atlantic and the Lake Worth Lagoon eats standard galvanized edge metal within 5 – 7 years. We see rust bleed at the fascia and valleys on roofs that are barely middle-aged. We specify hot-dip galvanized or stainless.
- Moisture trapped by foil-faced underlayment. Lagoon humidity gets trapped against metal edges where older foil underlayment was installed. That’s how a drip edge rusts from the inside while the shingles still look fine from the street. Marine-grade synthetic underlayment prevents this.
- Inland-spec flashing that pits within a few seasons. Thin aluminum or painted steel flashing holds up fine west of the turnpike but pits and stains quickly on the coastal side of West Palm Beach. The same spec that works in Wellington fails fast here.
- Wind-lifted ridge vents and vent boots. The ridge vent caps and pipe boots are penetration points, and in salt air plus 130 mph wind events, they’re the first to leak. We re-flash every penetration on every replacement and seat the boots in marine-grade sealant.
Pricing for Roof Replacement in West Palm Beach, FL
Here’s what we quote in the West Palm Beach market, and these numbers are current for this area, not a national average. A full architectural shingle replacement on a 1,800 – 2,400 sq ft home runs $9,800 to $18,500. The coastal-spec upgrade (stainless or hot-dip fasteners, marine-grade underlayment, hot-dip drip edge) adds $1,200 to $3,800. Flat or low-slope sections add $6 to $9 per square foot. Roof decking replacement, when rot shows up, adds $60 to $80 per sheet of plywood replaced. Tear-off and disposal are included in the line item, not buried in a change order. Call (325) 246-5075 and we’ll send you a written line-item price for your exact roof, before any work starts.
We Also Serve Cities Near West Palm Beach
Our Roof Replacement crews work throughout Palm Beach County, including Palm Beach, Greenacres, North Palm Beach, and Palm Beach Gardens. The same coastal-spec standards apply everywhere east of the turnpike. If you’re in any of those areas and need a straight answer on your roof, West Palm Beach is the hub we coordinate from, and we’ll get you scheduled fast.
Serving West Palm Beach, FL – Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in West Palm Beach
No, it’s not an upsell. Roofs between the Atlantic and the Lake Worth Lagoon see salt aerosol from two sides, and standard galvanized fasteners rust through at penetrations within 5 – 7 years. We’ve pulled drip edge off El Cid barrel-tile roofs that was rusted from the inside while the shingles looked fine. Stainless or hot-dip fasteners are the difference between a roof that leaks at year seven and one that holds its 130 mph rating through the next named storm. Call (325) 246-5075 and we’ll show you photos from actual West Palm Beach tear-offs so you can see it yourself.
Three things change: fasteners go from standard galvanized to stainless or hot-dip, underlayment goes from standard felt to marine-grade synthetic, and drip edge goes from painted steel to hot-dip galvanized. The inland-spec version of the same roof costs $1,200 to $3,800 less up front but fails at the metal edges within a decade. The coastal spec is the version that doesn’t rust from the inside. We specify it for homes within a few miles of the water and let you decide on the inland spec only if you understand what you’re trading away.
No. The 130 mph rating only holds if the fasteners, underlayment, and edge metal are done right. A shingle can be rated for 130 mph, but if the ring-shank nails are standard galvanized and the edge metal is painted steel, the roof fails at the rust points, not the shingle. The wind rating is a system claim, not a material claim. We spec stainless ring-shank nails and marine-grade synthetic underlayment on every coastal job so the rated system actually holds together when a nor’easter or hurricane pushes through Palm Beach County.
We give you a written line-item price that separates materials, labor, tear-off, decking replacement (if needed), flashing, and the coastal-spec upgrade. That’s the only way to compare bids fairly. A $12,000 bid that includes stainless fasteners and marine-grade underlayment is cheaper than an $11,000 bid that uses standard galvanized and painted steel. Ask for the fastener spec and the underlayment brand in writing. We put it on every estimate, so you know exactly what you’re paying for. Call (325) 246-5075 for your written number.
Salt aerosol settles on the metal edges, penetrations, and valley flashing, then the lagoon humidity keeps it wet. That’s the combination that rusts galvanized edge metal from the inside within 5 – 7 years. Inland roofs in Palm Beach County never see that sustained salt load, so their standard metal holds up for a decade or more. In West Palm Beach, the drip edge is the first thing to fail, often before the shingles age out. The fix is hot-dip galvanized or stainless metal and marine-grade underlayment that doesn’t trap moisture against the edge strip. That’s the coastal spec we install here every week.
Written by Dylan Pace, Owner at Crestview Roofing, serving West Palm Beach since 2000.