Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roof Installation Across Long Beach
Nobody in Long Beach plans for a roof replacement, but when the time comes, you want a crew that knows exactly what salt air does to a roof two blocks off Ocean Boulevard versus one up by El Dorado Park. Crestview Roofing has installed and replaced roofs from Belmont Shore to Bixby Knolls, and we’ve seen firsthand which materials hold up and which ones fail early in this coastal climate. We give you a written price before any work starts, a live trackable arrival time, and photo documentation of the job before and after. Call (325) 246-5075 to schedule your free estimate, and you’ll know exactly what you’re paying before we ever set foot on your roof.
Why Crestview Roofing Is Long Beach’s Preferred Roof Installation Company
Roof installation in Long Beach is different from roof installation in Lakewood or inland Orange County. We’ve torn off roofs near the Naples canals and along the Peninsula where the shingles looked fine from the street, but the fasteners underneath had rusted to dust. That kind of local knowledge tells us what to look for before we quote, so you’re not surprised by rotted decking halfway through the job.
Every Crestview job runs on The Relay Standard: a written price delivered before work starts, background-checked and uniformed technicians with a live arrival time you can track on your phone, before-and-after photos, and a digital invoice sent by text. If a repair is covered and fails within 365 days, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s in writing on every job, including your roof installation. Dylan Pace leads our team with a simple rule: the number on the written quote is the number on the invoice.
We stock materials from GAF, Owens Corning, and Tamko for Long Beach jobs, so we’re not waiting on a supplier in Carson when your roof is already torn off. Our response time to most Long Beach neighborhoods is the same day or next morning for inspections, and we answer calls with a live person 24/7. No voicemail loops, no “we’ll get back to you Monday.”
Roof Flashing Installation in Long Beach
Roof flashing installation in Long Beach is where we see the most coastal damage, because flashing is the first thing salt air attacks. Flashing is the metal strips that seal the joints around chimneys, vents, skylights, and where roof planes meet walls. In Long Beach’s salt-air band, standard galvanized flashing rusts through in eight to twelve years, long before the shingles wear out. A complete flashing replacement for a typical Long Beach home runs $650 to $1,900 depending on how many penetrations your roof has and how much of the old metal needs cutting out. If you’re getting a full roof installation, we always include new flashing, and we specify hot-dip-galvanized or stainless steel so the metal outlasts the shingle instead of the other way around.
Chimney and Vent Flashing Replacement
Chimneys and plumbing vents concentrate rust because the marine moisture in Long Beach’s air settles on the metal and sits there. We remove the old flashing, check the decking underneath for rot, and install new flashing with a corrosion-resistant finish. The flashing is then sealed with a marine-grade sealant that handles the constant salt exposure near the coast.
Valley Flashing in Coastal Conditions
Roof valleys channel water, which also means they channel whatever’s in the air near the ocean. We use wider valley metal than inland roofers commonly do, because Long Beach storms can drive water at an angle that narrow valleys can’t handle. Proper valley flashing also prevents wind-driven marine moisture from getting under the shingle edges.
TPO Roofing Installation in Long Beach
TPO roofing installation in Long Beach is our recommendation for flat or low-slope sections on homes, garages, and additions. TPO is a single-ply thermoplastic membrane that reflects heat, which matters in Long Beach when the summer sun beats on a flat roof over a converted garage or a second-story sunroom. A typical TPO installation for a Long Beach home addition or garage runs $6.50 to $9.00 per square foot, so a 300-square-foot flat roof runs roughly $2,000 to $2,800 including new edge metal and flashing. For Long Beach specifically, we specify TPO with a UV-stabilized top layer and stainless or aluminum edge metal, because standard steel edge metal corrodes fast in the coastal air.
Single-Ply Membrane for Low-Slope Roofs
TPO is welded at the seams with hot air, not glued, so the membrane becomes one continuous sheet. That’s important near the coast where wind-driven rain finds every seam and joint. The white membrane also reflects UV and keeps the roof surface cooler, which reduces the heat load on your home’s interior.
Coastal Edge Metal and Termination Details
The edge termination is where TPO roofs fail in Long Beach if the metal is cheap. We install marine-grade aluminum drip edge and stainless fasteners at every termination point. This is the same logic we apply to shingle roofs: the metal package determines the lifespan, so we don’t cut corners on the parts you can’t see from the ground.
Trusted Brands We Service in Long Beach
We install and service roofing systems from GAF, Atlas, and Boral, and we keep common Long Beach replacement parts in stock so we’re not waiting on a distributor in Signal Hill when a job is in progress. GAF architectural shingles are our most-requested product for Long Beach homes, because they carry a wind rating that matters when a winter storm pushes off the Pacific. Atlas and Boral are both solid options for homeowners who want a specific color or profile. We’ll give you a written quote with exact material brands and model numbers before work starts, so you’ll always know what’s going on your roof and what it costs.
Common Roof Installation Problems We See in Long Beach Homes
- Rusted fasteners along eaves and rakes. Electro-galvanized nails corrode at the head within a decade near the coast, and the shingle loses its grip. We specify stainless or hot-dip-galvanized fasteners on every Long Beach roof installation, because the metal package is what fails first here.
- Flashing that rusts before the shingle wears out. Chimney, vent, and valley flashing made from standard steel lasts eight to twelve years in Long Beach’s salt air. We replace it with hot-dip-galvanized or stainless material and seal it with marine-grade sealant.
- Wind-driven moisture penetration on older bungalows. Homes in Bluff Heights, Belmont Heights, and Rose Park were built before modern underlayment standards. Salt-laden wind finds the gaps, and decking rots from the underside. We lay ice and water shield through valleys and along eaves on every re-roof.
- Low-slope sections that leak at the edge metal. Garage roofs, porches, and additions with flat or low-slope sections often fail at the termination point where the membrane meets the drip edge. Salt air corrodes the metal and the membrane pulls away. We specify marine-grade aluminum edge metal on these sections.
Pricing for Roof Installation in Long Beach, CA
A full roof installation in Long Beach runs $14,000 to $28,000 for a standard single-family home, depending on square footage, tear-off, decking replacement, and the material you choose. That’s the real range, not a teaser number. Architectural shingle roofs on a 1,200 to 1,800 square foot home run $14,000 to $22,000. A premium GAF or Boral system with upgraded underlayment and marine-grade flashing runs $20,000 to $28,000. Flashing-only replacement is $650 to $1,900. TPO for a low-slope section is $6.50 to $9.00 per square foot. The coastal-spec metal package adds roughly $1,500 to $3,000 to a full roof job compared to inland-spec hardware, and that money is the difference between a roof that lasts 30 years and one that needs a re-roof in ten. Call (325) 246-5075 for a free written estimate, and we’ll give you exact numbers before any work starts.
We Also Serve Cities Near Long Beach
Crestview Roofing serves homeowners throughout the Long Beach area, including Signal Hill, Carson, Seal Beach, and Lakewood. If you live in a neighboring city, the same Roof Installation standards apply: written pricing before work starts, live arrival times, and photo documentation on every job. And for homeowners in the neighborhoods we serve here, Long Beach salt-air standards govern the materials we specify no matter where the border falls.
Serving Long Beach, CA – Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Roof Installation in Long Beach
Yes, it changes the metal package completely. Standard electro-galvanized nails and steel drip edge that last 30 years inland rust through in eight to twelve years within a few miles of the Long Beach coast. We specify stainless or hot-dip-galvanized fasteners and marine-grade aluminum or stainless flashing on every coastal job, and the added cost is typically $1,500 to $3,000 on a full roof, which is cheaper than a second roof in a decade. Call (325) 246-5075 to schedule a free estimate and we’ll show you the difference in writing.
Most Long Beach single-family homes run between 15 and 25 squares, where one square equals 100 square feet of roof area. The square count drives material volume, labor hours, and disposal fees, so accurate square measurement is the foundation of an honest quote. When you call (325) 246-5075, we measure your roof in person before we write your estimate, so the number you get is the number you pay.
Yes, most architectural shingles from GAF, Atlas, and Boral carry a 110 to 130 mph wind rating when installed with the correct nailing pattern and the manufacturer’s specified fasteners. The rating only holds if the fasteners survive the salt air, which is why we install stainless or hot-dip-galvanized nails on every Long Beach roof. We’ll put the exact wind rating for your chosen material in your written quote.
TPO membrane is our standard recommendation for low-slope and flat sections on Long Beach homes, because it welds into one continuous sheet, reflects heat, and handles the coastal air when paired with marine-grade edge metal. A typical 300-square-foot garage or addition roof runs $2,000 to $2,800 including new edge metal and flashing. Call (325) 246-5075 and we’ll measure your low-slope section and give you a written price.
Because everything metal on a Long Beach property lives in the same salt-air band, so electro-galvanized steel fails on a similar timeline whether it’s holding a shingle, a fence post, or a railing bracket. When we’re on your roof, we’ll flag any exterior metal that’s rusting early, and we can recommend marine-grade fasteners or replacement hardware for the whole property. The coastal-spec version costs more up front, but it’s the cheaper option by the ten-year mark.
If your Long Beach roof is showing its age, or you want an honest, written price before you commit to anything, call (325) 246-5075. We’ll schedule a free estimate, measure your roof, and give you exact numbers with the material brands and the coastal-spec metal package spelled out line by line.
Written by Dylan Pace, Owner at Crestview Roofing, serving Long Beach since 2000.