Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roof Installation Across Fontana
If you’re weighing a roof installation in Fontana, the two numbers that matter most are the cost per square and the nailing pattern the crew will use. Fontana sits in a Santa Ana wind corridor along the Cajon Pass, so a roof here lives or dies by wind uplift resistance as much as sun exposure. Most full replacements on Fontana tract homes from the 1980s through 2000s run between $9,500 and $18,000 depending on square count, material, and whether the original underlayment can be saved. Our teams serve Fontana daily from the Inland Empire office, and every job starts with a written price before any work begins. Call (325) 246-5075 to schedule your free estimate.
Why Crestview Roofing Is Fontana’s Preferred Roof Installation Company
Dylan Pace built Crestview Roofing in 2000 on a simple idea: a homeowner should never have to guess what a roof will cost or who is showing up to do the work. That thinking shows up in every Fontana job we take. The number on your proposal is the number on your invoice, full stop. No add-on surprises at the door and no renegotiation mid-job. Fontana homeowners tell us they left other roofers for exactly that reason.
Our crews who work Fontana know the tract layouts: the tight setbacks near Southridge, the two-story sprawl off Summit Avenue, the older pockets around downtown where homes predate the big build-out. That local familiarity means we scope the job correctly the first time. You’ll also get a live trackable arrival time, before-and-after photo documentation, and a digital invoice sent by text. The Relay Standard is what we call it: total visibility from the first call to the final walkthrough. A live person answers our phone 24/7, so you’ll never sit through a voicemail loop when you have a question about your Fontana roof.
Tile Roof in Fontana
Tile roof installation in Fontana almost always means working with what’s already up there, because most homes in the city’s 1980s-through-2000s tract build-out were originally roofed in concrete tile. The tiles themselves often have decades of life left. What fails first is the underlayment underneath, baked brittle by inland sun and heat. A typical tile roof replacement in Fontana, where we re-use the existing serviceable tile and install new underlayment, runs $7,500 to $14,500 depending on square count and decking condition.
Underlayment Replacement and Re-Set
We tear off what’s there, inspect and replace any softened decking, then lay new underlayment before re-setting the original tile. This is the correct scope for most Fontana tile roofs from the 1990s and early 2000s. It costs less than a full tear-off and buys the roof another twenty-plus years.
Full Tile Replacement
When tile is cracked, spalled, or mismatched from patch jobs over the years, a full replacement makes sense. A complete tile roof replacement in Fontana, new tile and all, typically runs $14,000 to $24,000 depending on square count and tile profile. We work with Atlas and Boral tile systems and write the full scope in the proposal before you sign anything.
Roof Ventilation in Fontana
Roof ventilation in Fontana is not optional, not with late-summer attic temperatures that routinely pass 140 degrees along the northern edge of the city where the Santa Anas push heat down from the pass. A properly ventilated attic keeps heat from cooking your new roof from underneath and keeps cooling bills from climbing. Adding or correcting ventilation during a roof installation in Fontana typically adds $600 to $1,800 depending on the type and number of vents and whether we’re cutting new ridge or soffit venting.
Ridge Venting for High Heat
Most Fontana roofs were built with passive ventilation, if they got much at all. We often add continuous ridge vent along the peak, which moves hot air out along the entire roofline rather than trapping pockets. This matters most on two-story homes off Sierra Avenue and Beech Avenue where gable ends block cross-flow.
Soffit Intake Correction
Exhaust venting only works if intake air can get in. On older Fontana homes, we regularly find soffits that were never vented or have been painted over. Correcting intake is part of the job when it’s needed, and it’s priced in the written proposal, not added later.
Trusted Brands We Service in Fontana
We install and service roofing materials from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. For Fontana’s tile-heavy housing stock, we keep Atlas and Boral tile profiles current in our material knowledge, and we stock flashing, underlayment, and accessory components that match the common tract-home profiles in the city. That means we’re not waiting weeks on a special-order part when your roof is open and the weather window is closing. Material quality is never the open question on a Crestview job in Fontana; we name the brand, the grade, and the wind rating in the written quote.
Common Roof Installation Problems We See in Fontana Homes
- Bids that don’t state the number of squares. Two Fontana proposals can look identical in price but differ by 400 square feet of coverage. We write square count into every quote so you can compare scope, not just totals.
- Reusing original 1980s and 90s underlayment. It looks intact from the attic, but decades of inland heat have broken down the asphalt. Laying new tile or shingles over it means failure in a few years. We replace it.
- Skipping the corrected nailing pattern. Shingle manufacturers publish wind-uplift nailing schedules. If a Fontana roof isn’t nailed to that pattern, with proper starter strip, it never earns the wind rating printed on the product label. We document nailing patterns in photos.
- Valley leaks at the decking. On original tile roofs in the neighborhoods around Sierra Lakes, we see decking softened at valleys where water sat under failed underlayment. Replacing that decking before re-roofing is the difference between a 40-year roof and a callback in six.
Pricing for Roof Installation in Fontana, CA
A full shingle roof installation on a typical 1990s Fontana tract home, roughly 22 to 28 squares, runs $9,500 to $16,000. Tile re-roofs that re-use existing tile over new underlayment typically land between $7,500 and $14,500. Full tile replacement runs $14,000 to $24,000. What moves the number in Fontana: square count, decking repairs, whether you need new ventilation, and the wind-uplift detail the material requires. We give you a written, line-item price before work starts, and that price doesn’t change unless you approve a change order in writing. Call (325) 246-5075 to schedule your free estimate.
We Also Serve Cities Near Fontana
Along with our full Roof Installation work across Fontana, we serve Fontana neighbors in Bloomington, Rialto, Rancho Cucamonga, and Riverside. Same written pricing, same live trackable arrival times, same 365-Day Done Right Promise on every repair.
Serving Fontana, CA – Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Roof Installation in Fontana
Compare them by square count, not by dollar total. A Fontana bid that doesn’t state how many squares of roofing it covers cannot be compared to another bid, period. After square count, compare the underlayment spec, the nailing pattern commitment, the ventilation scope, and whether decking repair is included or assumed. We write every one of these line items into our quote, so you can hold the two proposals side by side and see exactly where the money is going. Call (325) 246-5075 and we’ll walk your quote through this comparison with you, free.
Yes, a full roof installation in Fontana requires a building permit through the city, and your roofer should pull it and close it with a passing inspection. We pull permits on every full installation in Fontana and the inspection is scheduled before we call the job done. The permit cost is a line item in your written quote, not a surprise at the end. If a bid doesn’t mention permits, ask why before you sign.
No, and in Fontana you usually don’t. The concrete tile on most 1980s and 90s tract homes still has decades of service life left. We remove the tile, replace the underlayment and any compromised decking, then re-set the original tile with a corrected nailing pattern. It costs roughly half to two-thirds of a full tile replacement and is the right scope for most Fontana tile roofs we see. An inspection tells you which camp you’re in. Call (325) 246-5075 to schedule one.
Decking that needs replacement is the number one change on Fontana roofs. You can’t see bad decking from the ground, and sometimes not even from the attic. Water stains, soft spots at the valleys, or boards that flex underfoot show up only after the old roof is off. We photograph every sheet we flag, show you the damage, and you approve any decking replacement in writing before we proceed. Everything else that moves a Fontana roof price should have been visible at estimate time. If a roofer can’t see it until the roof is open, they should have told you that possibility up front, with a per-sheet price. We do.
A standard shingle tear-off and installation on a single-story Fontana tract home takes two to three working days. A two-story home or one with a tile re-set usually runs three to five working days. High-wind days in the Cajon corridor can push a tear-off back a day; we won’t strip a roof if the weather won’t let us protect the deck overnight. You’ll know the schedule before we start and you’ll see photo updates as the job moves. Call (325) 246-5075 to get a firm timeline for your address.
Written by Dylan Pace, Owner at Crestview Roofing, serving Fontana with written pricing, live arrival tracking, and photo-documented workmanship since 2000.