Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterOwens Corning Roof Installation in Los Angeles: What to Know First
We provide independent Owens Corning roof installation in Los Angeles, typically completing standard jobs in one to two days once materials arrive. Most full replacements on typical Valley or mid-city homes run $12,500 – $22,000 depending on the shingle line, roof complexity, and whether we’re stripping old layers. You’ll get a written, line-item price before we order anything – the number on the page is the number on the invoice.
This page is for Los Angeles homeowners who already know they want Owens Corning shingles, or who bought a home with an existing Owens Corning roof that’s reached the end of its service life. We’re not here to sell you on the brand – you already chose it, or it chose you. We’re here to make sure it’s installed right, with the right underlayment, the right ventilation math, and zero surprises on the bill. Call (325) 246-5075 to schedule your free estimate.
How Owens Corning Products Fail – and How We Fix Them
- Duration® Series: granule loss accelerated by L.A.’s UV cycles. The Duration line’s SureNail® strip is excellent, but the granule surface takes a beating in Los Angeles where summer roof temperatures hit 160°F and winter rains come in concentrated bursts. We see premature bald spots on south-facing slopes in neighborhoods like Silver Lake and Echo Park, where tight lots trap heat. We strip to bare deck, install synthetic underlayment with better thermal stability, and specify Duration® Cool or a reflective upgrade when re-roofing.
- Oakridge®: architectural shadow lines flattening on low-slope sections. Oakridge’s laminate construction can look “melted” on pitches below 4:12, which is common on the front-gable additions we see throughout the San Fernando Valley. The adhesive between laminate layers softens, the dimensional profile collapses, and water channels where it shouldn’t. We catch this during pre-install inspection and recommend Oakridge only on 4:12 and steeper, or we step you up to Duration® with its thicker laminate build.
- Supreme® three-tab: brittle fracture after 15 – 18 years in L.A. heat. The entry-level Supreme line was never built for four solid months of 90°F+ days. We replace hundreds of these in older Burbank and North Hollywood neighborhoods where the original 1990s – 2000s install is finally giving out. Full strip-and-replace is the only honest fix – patching brittle three-tabs is throwing money at a roof that’s structurally aged out.
- TruDefinition® Duration® COOL: color fading in coastal exposure zones. The COOL granule technology works, but we’ve noticed accelerated color shift within 8 – 10 years on homes west of the 405, where marine layer + salt air + UV create a triple attack. It’s cosmetic, not functional, but if you’re in Playa del Rey or Venice and color consistency matters to your HOA, we discuss this openly during selection and document the expected fade rate in writing.
- DeckSeal® self-adhered underlayment: wrinkling on torch-down transitions. On Los Angeles homes with mixed roof types – comp shingle over living space, torch-down over the garage – the Owens Corning underlayment can telegraph wrinkles if the deck prep isn’t perfectly flat. We sand high spots, shim low spots, and sometimes switch to a mechanically-attached synthetic underlayment on the transition zones to prevent the “washboard” look that shows through new shingles.
Our Owens Corning Roof Installation Process
- 1
Free inspection with photo documentation. We walk the roof, document every soft spot, vent condition, and penetration. You get the photos by text before we leave the driveway.
- 2
Written line-item quote, no deposit required. Every material, every labor line, every disposal fee – spelled out. The price is fixed. Every promise in writing – that’s just how we do it.
- 3
Material order with Owens Corning-verified specs. We order through our distributor with the exact color, line, and accessory bundle (ridge caps, starter strips, ventilation) to maintain system warranty compatibility.
- 4
Strip, deck inspection, and dry-in. Old roofing comes off, we check for plywood delamination (common in pre-1980s Los Angeles construction), replace as needed, and seal the deck with synthetic underlayment same-day.
- 5
Shingle install with ventilation verification. We don’t just nail shingles – we calculate net free vent area, confirm intake/exhaust balance, and use Owens Corning’s specified nail pattern for your wind zone.
- 6
Final walk, photo set, and digital invoice. Before-and-after photos, live arrival time logged, invoice texted to your phone. The 365-Day Done Right Promise activates automatically.
What Owens Corning Roof Installation Costs in Los Angeles
| Job Type | Typical Range | What Moves the Price |
|---|---|---|
| Supreme® three-tab strip-and-replace, 1,500 sq ft | $8,500 – $12,000 | Layer count, deck repair, steep pitch |
| Oakridge® architectural, 2,000 sq ft | $12,500 – $17,500 | Valley length, dormer count, ridge vent add |
| Duration® with SureNail®, 2,500 sq ft | $16,000 – $22,000 | Cool shingle upgrade, complex cut-up roof |
| Deck repair / plywood replacement | $85 – $140 per sheet | Access difficulty, thickness (3/8″ vs. 5/8″) |
| Complete re-flashing (chimneys, vents) | $450 – $1,200 each | Height, masonry condition, cricket build |
These are real Los Angeles market ranges based on 2024 – 2025 material and labor costs. We’re not the cheapest roofers in the city, and we don’t try to be. We’re the ones who tell you the real number before work starts and stick to it. Call (325) 246-5075 for your exact quote – estimates are free, and there’s no obligation to book.
Why Los Angeles Homeowners Call Crestview Roofing for Owens Corning Work
Dylan Pace grew up patching roofs in Glassell Park, and our crew has installed Owens Corning products from Pacific Palisades to Pasadena. We know which lines hold up to L.A.’s specific abuse – the inland heat bake, the Santa Ana wind cycles, the occasional December downpour that finds every weak seam.
We’re an independent Owens Corning service provider, not a factory-authorized program, which means we can also source GAF or CertainTeed if your HOA changes requirements or if a color match across brands becomes necessary on a partial repair. Our techs are background-checked and uniformed, you track their arrival live, and every job carries the 365-Day Done Right Promise in writing – if anything we installed fails within a year, we fix it free, including the second visit. Calls are answered by a live person, 24/7.
FAQs
No – the manufacturer’s warranty on the shingles themselves remains valid as long as the product is installed to their published specifications, which we follow. The system warranty (covering both materials and our labor) is backed by Crestview’s 365-Day Done Right Promise, not the factory. Call (325) 246-5075 and we’ll walk you through exactly what’s covered.
Most complete replacements take one to two working days once materials are on-site. Material delivery typically runs 3 – 5 business days after you approve the quote. Complex roofs with multiple dormers or steep pitches in the Hollywood Hills may stretch to three days. We give you a firm start date in writing, not a “sometime next week” window.
If your Supreme three-tab is past 15 years or your Duration line is past 20, replacement is usually the better use of your money – Los Angeles permits don’t allow more than two roofing layers, so a third repair layer isn’t an option. We give honest assessments: if a targeted repair makes sense, we’ll quote it. If it doesn’t, we’ll tell you why. Call (325) 246-5075 for a free inspection.
We can get close, but we never promise exact color match on repairs – even Owens Corning’s own production lots vary slightly, and L.A. sun fades installed shingles at different rates depending on exposure. For anything visible from the street, we typically recommend replacing the entire slope or discussing the match tolerance before we start. We document this conversation in writing so there’s no surprise.
Yes – we pull the L.A. Department of Building and Safety permit, schedule the inspection, and make sure it passes. Permit costs are listed as a line item in your written quote, not hidden in “administrative fees.” You’ll get the signed-off card for your records. Call (325) 246-5075 to get your permit process started with your free estimate.
Written by Dylan Pace, Owner, Crestview Roofing at Crestview Roofing, serving Los Angeles and nearby areas.